Skip to content

Where to Buy: Alibaba

1. Product Introduction

▫️ Overview

Ra-11

  • Ra-11 is an ultra-high-performance RF front-end module designed for IoT, long-range wireless communication, industrial, medical, and other wireless communication applications, featuring the SEMTECH third-generation LoRa transceiver LR1121 RF chip as its core.
  • Its key advantages include an ultra-compact package and extreme RF performance. By optimizing the collaborative design of power amplifier, low-noise amplifier, filter, and peripheral matching network, it achieves high power, low loss, low spurious emissions, and strong anti-interference capability.
  • The LR1121 RF chip supports Sub-GHz, 2.4GHz ISM band, and licensed S-band satellite communication bands, enabling both terrestrial communication and satellite communication applications. It features ultra-long-range transmission and ultra-low power consumption.

▫️ Technical Highlights

  • Supports LoRa / (G)FSK modulation.
  • Supports Sub-GHz / 2.4GHz LR-FHSS modulation.
  • Modem-E firmware (embedded with LoRaWAN protocol stack) is available for factory pre-programming.
  • Low-frequency band: default support for 470–510 MHz in China (433MHz can be customized).
  • High-frequency band: default support for 2400–2500MHz in China.
  • Operating voltage: 3.3V. Theoretical maximum transmit power reaches +22dBm@Sub-GHz and +13dBm@2.4GHz, ensuring stable full-power transmission across the supported frequency bands, with multi-step software-configurable power.
  • Integrated PA regulator power selector. This design simplifies the dual power supply configuration for +15/+22dBm@Sub-GHz. Users can select a low-power operating mode with a maximum output power of +15dBm.
  • In the Sub-GHz band, it is compatible with SX126X and SX127X series products.
  • In the 2.4GHz band, it is compatible with SX128X series products.
  • Hardware support for AES-128 encryption/decryption algorithm.
  • Built-in power supply ESD protection circuit.
  • Antenna interface supports both castellated pads and an IPEX connector.

▫️ Selection Table

Type
Select products to compareSelected 0/20

Expand to search and pick modules by chip, protocol, flash and more.

Default comparison: modules matching "Ra-11"
Parameter
🖼️ Product Image
📶 Wireless Protocol
🧩 Chip
🧩 Module Flash Size (Mbits)
📡 Frequency Band (MHz)
📦 Package
📏 Dimensions (L×W×H) (mm)
🌡️ Operating Temp Range (℃)
🧊 Storage Temp Range (℃)
📶 Antenna Type
🔌 Interface
🧷 Available GPIO
Min Voltage (V)
Max Voltage (V)
Typical Voltage (V)
🔋 Max Current (mA)
🔋 Rx Current (mA)
🌙 Standby Current (μA)
💤 Sleep Current (μA)
Certifications
📣 Max TX Power (dBm)
〰️ Modulation
🛰️ Max Distance (m)
📘 Protocol Support

2. About Modules

ModuleDatasheetsPCB Footprints
Ra-11ViewDownload

3. STM32F103C8T6 HAL-based driver

ModuleLink
Ra-11Download

user manual: View

ModuleCertificateLink
Ra-11CE (RED)In testing
Ra-11FCCIn testing

5. FAQ

Questions and Solutions View

6. Compliance & Testing

▫️ Power Consumption Test Reports

▫️ Hardware Reliability Test Reports

Released under the MIT License. Build Time 2026-07-13 17:26:16