language:

Ai-Thinker Technology

Trace: UWB Module Series

UWB Module Series



UWB Module Series

Overview

UWB technology is a wireless carrier communication technology that uses a frequency bandwidth above 1 GHz. It does not use a sinusoidal carrier, but uses nanosecond-level non-sinusoidal narrow pulses to transmit data. Therefore, it occupies a large spectrum. Although wireless communication is used, its data transmission rate can reach hundreds of megabits per second. Using UWB technology can transmit signals over a very wide bandwidth.

BU01 is an ultra-wideband (UWB) transceiver module based on Decawave's DW1000 design. BU01 integrates antenna, RF circuit, power management and clock circuit. BU01 can be used in two-way ranging or TWR positioning systems, with positioning accuracy up to 10 cm and supporting data rates up to 6.8 Mbps.

  Features

  • Simple integration, no RF design required
  • Using RTLS infrastructure to expand the communication range
  • Support high label density
  • Comply with IEEE 802.15.4-2011 UWB standard
  • Support 4 channels from 3.5 GHz to 6.5 GHz
  • Programmable transmit power
  • Power supply 2.8 V to 3.6 V
  • Power consumption in sleep mode<1mA
  • Support two-way ranging and TDOA
  • Support SPI interface
  • Data rate 110 kbps, 850 kbps, 6.8 Mbps


BU-01 module documentation summary

NodeMCU-BU01 Resource Summary


NodeMCU-BU01 is a development board that integrates Ai-Thinker BU-01 indoor positioning module + MCU. It has an onboard temperature and humidity sensor and provides AT files for easy integration into your project;



Front

Development board features


  1. 35mm*55mm board 50pin leads to facilitate peripheral function development Micro power interface, convenient for various power supply equipment access
  2. STM32F103 main control, rich chip resources
  3. Acceleration sensor, phase measurement, accurate position status information
  4. Temperature and humidity sensor, measure current temperature and humidity information, no need to connect other temperature and humidity sensors
  5. Independent buttons and LEDs meet application logic control and status indication


NodeMCU-BU01 specification: NodeMCU-BU01 specification NodeMCU-BU01 specification

NodeMCU-BU01 AT instruction set: BU01 development board AT instruction set

back front


Secondary development tutorial


Contact us


Shenzhen Ai-Thinker Technology Co., Ltd.
Support: support@aithinker.com
Business: overseas@aithinker.com
Tel: +86-15989589908 (same number on WeChat)
Address: Room 410, Building C, Huafeng Smart Innovation Port, Gushu, Xixiang, Baoan District, Shenzhen