ESP8266 & ESP32 use AT command development example


Note: This page mainly uses AT commands to develop wifi modules.

Factory latest AT firmware and SDK source code: ESP8266 SDK发布


1. STM32 project example of ESP8266

AT command project: STM32AT command project for ESP8266

Instructions for use: unzip the project compression package to obtain

Tencent Cloud AT Command Control Lamp Project: stm32对接腾讯云控灯.zip

Ali Feiyan AT command light control project: STM32 Ali Feiyan AT command light control project of ESP8266

2. Smart config (Smartconfig) example


Description: Use two methods for network distribution, Espressif ESP-Touch and WeChat Airkiss.

Preparation: 1 NodeMCU or ESP8266 wifi module, ESP-Touch APP Android IOS

Mobile APP source code: https://github.com/EspressifApp/EsptouchForAndroid.git && https://github.com/EspressifApp/EsptouchForIOS.git

NodeMCU purchase link: NodeMCU purchase


Method 1: ESP-Touch


1, AT+CWMODE_DEF=1    !! Configure the WiFi module to work in single STA mode, and save the configuration in flash

2, AT+CWAUTOCONN=1    !! Enable automatic connection to AP after power on

3, AT+CWSTARTSMART=3   !! Support ESP-Touch and Airkiss smart distribution network

4. Connect the mobile phone to the AP that needs network configuration, open the mobile APP ESP-Touch, enter the password, click OK, and wait for the network configuration to succeed, see Figure 1

         Figure 1

5, AT+CWSTOPSMART     !! Regardless of whether the network configuration is successful or not, you need to release the memory occupied by the quick connect, see Figure 2

6, AT+CIPSTATUS      !! Check the network connection status 

            Figure 2


To

Method 2: Airkiss


1, AT+CWMODE_DEF=1     !! Configure the WiFi module to work in single STA mode, and save the configuration in flash

2, AT+CWAUTOCONN=1     !! Enable automatic connection to AP after power on

3, AT+CWSTARTSMART=3    !! Support ESP-Touch and Airkiss smart distribution network

4. Open WeChat, follow the WeChat public account “Anxinke Technology”, click wifi configuration, click start configuration, enter the password, click connect, see Figure 3

        Figure 3

5, AT+CWSTOPSMART     !! Regardless of whether the network configuration is successful, you need to release the memory occupied by the quick connect

6, AT+CIPSTATUS       !! Check the network connection status, Figure 4

          Figure 4


3. HTTP communication example


1, AT+GMR      !! Start querying version information

AT version:1.2.0.0(Jul 1 2016 20:04:45)

SDK version: 1.5.4.1(39cb9a32)

Ai-Thinker Technology Co., Ltd.

Integrated AiCloud 2.0 v0.0.0.5

Build: 1.5.4.1 Mar 24 2017 11:06:56

OK

2, AT+CWMODE_DEF=1    !! Configure the WiFi module to work in single STA mode, and save the configuration in flash

OK

3, AT+CWJAP_DEF=“newifi_F8A0”,“anxinke123” !!Connect to the Internet

WIFI CONNECTED

WIFI GOT IP

OK

4, AT+CWAUTOCONN=1    !! Enable automatic connection to AP after power on

OK

5, AT+CIPSTART=“TCP”,“183.230.40.33”,80 !!Connect to the server To CONNECT

OK

6, AT+CIPMODE=1                !! Set transparent transmission

OK

7, AT+CIPSEND                 !! Start sending

OK

8.> GET request

GET /devices/5835707 HTTP/1.1

api-key: xUrvOCDB=iRuS5noq9FsKrvoW=s=

``Host:api.heclouds.com ``\r\n\r\n(end)  

Response:

HTTP/1.1 200 OK

Date: Tue, 09 May 2017 01:21:06 GMT

Content-Type: application/json

Content-Length: 213

Connection: keep-alive

Server: Apache-Coyote/1.1

Pragma: no-cache

{“errno”:0,“data”:{“private”:false,“protocol”:“EDP”,“create_time”:“2017-05-06 12:51:52”,“online”:false,“ location”:{“lon”:0,“lat”:0},“id”:“5835707”,“auth_info”:“Light001”,“title”:“SLight”,“tags”:[]},“ error”:“succ”}

9,>POST request

POST /devices/5835707/datapoints HTTP/1.1

api-key: xUrvOCDB=iRuS5noq9FsKrvoW=s=

``Host:api.heclouds.com Content-Length:60 \r\n {“datastreams”:[{“id”:“switch”,“datapoints”:[{“value”:1}]}]}|(end) Response: HTTP/1.1 200 OK Date: Tue, 09 May 2017 01:28:42 GMT Content-Type: application/json Content-Length: 26 Connection: keep-alive Server: Apache-Coyote/1.1 Pragma: no-cache {“errno”:0,“error”:“succ”} 10, +++                     !! Exit the transparent transmission, do not check the new line (\r\n)
===== 3. STA+ connect to TCP Server ===== —- 1,AT+CWMODE_DEF=1                !! Working in a single station module, setting parameters are saved to flash 2,AT+CWJAP_DEF=“newifi_F8A0”,“anxinke123”   !! Connect to the router and save to flash 3,AT+CIPSTART=“TCP”,“192.168.99.217”,6001   !! Connect to the TCP server, this experiment uses the network debugging assistant to test 4,AT+CIPSEND=5                  !! Method 1: Send data with specified data length (Data:test1), ``see Figure 1

                                         </wrap> Figure 1

5,AT+CIPMODE=1                  !! Method 2: Use transparent transmission mode to send data

6,AT+CIPSEND                       !! Send data (Data: Test2), see above “Figure 1”:

7, send: +++                   !! Exit the transparent transmission and send three consecutive +++, do not check the new line (\r\n), see the picture below:

8. After exiting successfully, you can send AT command                   !! See the picture below: